Produktbeschreibung
Launch X-PROG 3 is newly introduced compatible module, featuring key programming, all keys lost for VW models, EEPROM read and write, Key simulator and other advanced IMMO functions. the XPROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X431 V, X431 V+, X431 Pad VII, and more models.
Launch X431 X-PROG 3 XPROG3 Advanced Immobilizer & Key Programmer XPROG 3 Chip Reader
Highlights of Launch X431 Xprog3
1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty
3. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning
4. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
5. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox
6. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine
7. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
8. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
9. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
10. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
11. Can work with X431 MCU3 Adapter to do Mercedes Benz All Key Lost and ECU TCU Reading
X431 Prog3 Description:
X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Launch Tech X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicles. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V+, X-431 Pad V, and more models.
Core Functions
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/ AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports VW/ AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
13. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
15. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
16. Works with reprogramming device to backup/ restore programming data (For Bosch/ Siemens engine ECU).
X-PROG 3 Powerful Functions List：
EEPROM read and write
Key read and write
special key generation
on-board MCU read and write
BMW engine ISN code reading
Benz key
BMW CAS4+, FEM chip read and write
Key Simulator
Audi 5th generation steering column chip reading and writing
Volkswagen's fourth-generation meters are lost
OBD reads MED17 engine
Read engine in BENCH mode
Volkswagen fourth-generation UDS engine replacement
Boot mode read engine
Volkswagen MQB engine, gearbox, steering column lock replacement
Volkswagen four-generation free accounts are all lost
Mercedes-Benz engine gearbox wipe empty function
Transmission data reading
Supports Car List :
For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM
Supported Systems
Engine system, automatic transmission, instrument system, CAS, body system, lock system…
Compatible With
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
X-Prog 3 Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1, 000 product models, and they are continuously being updated.
Working EEPROM : (over 1000kinds model,Updating.....)
4Wire GI Numonyx SST
AdestoGigaDeviceOKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCTXicor
Atmel I2C PhilipsxUSSR
BOSCH ITT PioneerYMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony
X-PROG3 parameter
Interface: DB26, DB15
Input voltage: DC12V
Input current: 500mA
Working temperature: 0-50℃
Storage temperature: -20-70℃
Package List:
• Main unit
• Power adaptor
• Main diagnostic cable
• The fourth-generation data acquisition cable
• The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
• BENCH mode cable
• MCU converter V1
• MCU converter V2
• MCU cable with multiple leads
• EEPROM chip adaptor
• Benz infrared analog acquisition key
How to use X-PROG3 to read and write data?
Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.
Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host
Contact Us
Email: Sales@CarOBD.de
Skype: CarOBD.de
Facebook: https://www.facebook.com/carobd.de/Whatsapp: +86 19947637411
Trustpilot:https://www.trustpilot.com/review/www.carobd.de CarOBD.de QRcode:
Scan the QRcode,feel free to contact us on your smartphone.
Shipping Warranty:
1) EU Warehouse Shipping: 3-5 working days with No Tax. We have stock in our Czech warehouse for most items. All Items titled "EU Ship" are ship from our Czech warehouse.
2) Yodel Virtual warehouse Shipping: 6-8 days with No Tax for EU customers.
3) Yanwen Express: 7-10 working days. No Tax for European Countries.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
(Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you need faster DHL shipment,please contact us ,thank you)
4) DHL Shipping: 5-10 working days. For the items have no stock in EU warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
5) 4PX Postal Service: 8-12 working days. For the products mentioned"Standard Flat Rate Shipping Service" we will send via postal service
