Supports OBDII 16PIN protocol communication detection and ECU maintenance, diagnosis, programming, coding.
Convert the car OBD2 interface into banana plug 16 pin for signal detection and electrical level conversion.
Detect car communication is table or not, by working with any diagnostic tool.
Supply power to the car when changing battery.
Godiag GT100+ GT100 Pro OBDII Breakout Box has a voltage and current display, it is latest testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding And after all the keys are lost, the instrument and the anti-theft system are forced to activate by short-circuiting.
GODIAG GD101 J2534 Passthru for IDS Forscan SDD PCM-Flash & ELM327 Diagnose J1979 Compatible Vehicles Switch Mode Automatically
Supports Honda 3.105.012, GM GDS2 2023.7.13,Toyota Techstream V17.30.011, JLR SDD V163, Forscan 2.3.48, scanmaster v2.1, pcm-flash 1.2.0, VAG ODIS 9.1.0.
GODIAG GT112 K-Line Plus GODIAG GT111 Plus GODIAG GT110 for VW/AUDI/SKODA/Seat IMMO System Test Platform Cable Read & Write POGO PIN Data
GODIAG GT105 ECU IMMO Prog AD OBD II Break Out Box ECU Connector + Full Protocol OBD2 Jumper
GODIAG GT112 K-Line for VW Audi Skoda Seat 2nd & 3rd generation dashboard IMMO key matching test platform cable performs offline key and IMMO instrument synchronization test, intelligent IMMO system emergency start area sensing detection, IMMO dashboard offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching
Support DOIP-ENET communication
Support diagnostic programming and coding for BMW Benz, Volkswagen, Audi and other vehicles that support DOIP protocol. [no software is provided.]
Can be used for diagnostic programming and coding of Land Rover, VOLVO, and Geely vehicles that support DOIP communication.
With voltage display
When the voltage is lower than about 11v, an alarm will sound to remind the customer that the voltage is low and startup cannot be performed. Diagnostics or programming are not possible.
GODIAG for BMW BDC3/BCP Programming Test Platform streamlines immobilizer system management, key synchronization, and module diagnostics with unmatched reliability. All these powerful functions make it the ultimate all-in-one solution for professional engineers. GODIAG for BMW BDC3/BCP Programming Test Platform is your gateway to faster, safer, and more efficient diagnostics. Whether you're working on key synchronization, module programming, or instrument maintenance, this platform has got you covered.
Designed exclusively for BMW locksmiths, maintenance engineers, and BDC2 programming specialists, the GODIAG BDC2/BCP Test Platform streamlines immobilizer system management, key synchronization, and module diagnostics with unmatched reliability.
GODIAG G-A ECU/TCU cable is used to connect AUTEL IM608 IM508 with GT107, GT107+ or GODIAG ECU GPT Boot adapter to read and write data on VAG gearbox ECU and engine ECU, clone ECU.
GODIAG GT110 FOR VW Audi Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports VW Audi Skoda Seat and other models, and performs offline POGO PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems of Volkswagen, Skoda and Seat.
GODIAG GT111 for VW Audi Skoda Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching test platform cable with POGO PIN supports VW, Audi, Skoda, Seat and other models, using POGO PIN for offline data reading and writing. The product supports synchronization testing of keys and IMMO instruments, intelligent IMMO system emergency start area sensing detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.
GODIAG GT107+ Gearbox Cable 7-in-1 Set for V30/ DQ200/ DL510/ VL300/ VL381/ DQ500/ DQ250
Supports BMW BDC2 IMMO System.
Compatible with BMW OEM and aftermarket key.
Support 2015-2021 BMW G Chassis Add Key Function.
No token limitation. No Annual subscription, lifetime free update.
Compatible with multiple devices, PCM-flash, kess, Autel, VVDI, Launch X431, openport etc.
GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter. DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU and can also read, write and adjust data for DSG Gearbox ECU via ECU programming tools, etc.With GODIAG G-A ECU/TCU cable is used to connect AUTEL IM608 IM508 with GT107, GT107+ or GODIAG ECU GPT Boot adapter to read and write data on VAG gearbox ECU and engine ECU, clone ECU.
GODIAG GT114 Audi K-Lline IMMO cable performs offline key and IMMO instrument synchronization test, intelligent IMMO system emergency start area sensing detection, IMMO dashboard offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching... It supports Audi A6 C5 from 2000-2006.
The fuel injector tester kit contains 6 cleaning adapters of different sizes, suitable for 12V and below 12V injectors, such as EFI, GDI, FSI, MPFI, SPFI, TBI, CFI, L-JET, LPG, K-Jetronic, coil-type direct, motorcycle injectors, etc. This tester kit is the most powerful and adapter-rich injector tester kit on the market, which can help you accurately detect the performance of the injector, diagnose faults, and ensure the normal operation of the engine.
GODIAG GT107 ECU IMMO Kit is a DSG gearbox connection adapter. DSG Gearbox maintenance engineers can clone, diagnose and repair DSG Gearbox ECU and can also read, write and adjust data for DSG Gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.
GODIAG G-V ECU Cable for Connecting Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to Read & Write Data on VAG Gearbox ECU, Engine ECU
