Produktbeschreibung
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health. The BT506 enables technicians to view the health status of vehicle's battery and electrical system. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT506 to perform testing and display test results.
Autel MaxiBAS BT506 Battery & Electrical System Analysis Tool Support CCA CA SAE EN IEC DIN JIS MCA, Test Flooded, AGM, AGM Spiral, EFB GEL Batteries
Autel MaxiBAS BT506 Introduction:
AUTEL MaxiBAS BT506 is a battery and electrical system analysis tool which enables technicians to view the health status of vehicle's battery and electrical system. It is not an average battery tester because it measures not only the state of charge but also the battery state of health including its capacity, its ability to maintain and store the energy. Using adaptive conductance (an advanced battery analysis method), AUTEL MaxiBAS BT506 can produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, which is vital to determine a battery’s true health.
Highlights of Autel BT506:
- Support in-vehicle and out-of-vehicle tests
- Test 6- and 12-volt Batteries: 100-2000 CCA
- Test 12- and 24- Cranking/ Charging Systems
- Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
- Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
- Adaptive Conductance for 95% accuracy, Top accuracy in Industry
- Display test records in list form, offering a summary review tested and vehicles and/or batteries
- PDF test report for easy viewing, sharing, printing
- Permanently valid FREE software updates
- Upgrade-able to BT508: Purchase the Autel VCI V200P to upgrade the BT506 to the BT508 to get battery reset, battery change, and full system fault scan functions for one vehicle brand.
- Autel MaxiBAS BT506 can works with 95% Autel diagnostic tablet for detailed vehicle battery, cranking, startor and generator tests. Compatible models are: Autel MK808BT, MP808BT, MS906BT, MK906BT, MS906TS, MK906 Pro, MS906 Pro, MS906 Pro-TS, MK906 Pro-TS, MK908, MK908P, MS908S Pro, Elite, Elite 2, MS909, MS919, Ultra Lite, Ultra.
What makes BT506 more highly cost effective?
- Free lifetime Updates
- Upgrade to BT508 (buy additional V200P)
- Wide Compatibility: Compatible with Autel wireless scanners (except MK908 MK908P)
Design for 12V and 24V Cranking/ Charging Systems
Autel BT506 battery analyzer covers 98% of the car batteries on the market and strictly implements the car evaluation standards. It is widely loved by battery testing factories and workshops. It can quickly provide customers with the most accurate results, reduce the number of retests, and reduce time costs.
Working on 6/12V automotive batteries: 100 to 2000 CCA Range
Working on 12- and 24- cranking/charging systems
Battery Types: Test regular flooded, AGM,AGM spiral, GEL and EFB batteries,
Multiple rating systems are covered:CCA, SAE, CA, EN, IEC, DIN, JIS and MCA
Autel BT506 can work with 99% Autel Wireless Scanners, Such as :
Basic 808 Series: MK808BT PRO MK808BT MK808S-TS MX808S-TS MK808Z-TS MK808TS MX808TS
MP808BT DS808BT Series: MP808BT MP808BT PRO MP808BT KIT DS808S-BT MP808S-TS MP808Z-TS DS808S-TS DS808TS
MS906 MK906 Series: MS906TS MS906BT MK906BT MS906 Pro MK906 Pro MS906 Pro-TS MK906 Pro-TS
MK908 MS908 Series: MS908 PRO MS908S II MS908S PRO II MK908 II MK908 PRO II
Elite Series: Elite Elite II Elite II PRO
INTELLIGENT DIAGNOSTIC SERIES: MS909 MS919 Ultra Ultra Lite UltraEV MS909EV
Advanced Adaptive conductance
What is adaptive conductance?
Adaptive conductance testing refers to repeated tests on the same battery many times on an adaptive basis without depleting the battery.
Why bring adaptive conductance into BT506?
This brings us to the difference between load test and adaptive conductive test. Unlike traditional load tests, which consume a large amount of amperes from the battery during the test, adaptive conductance test can quickly and accurately determine the health of the battery at almost any given state, without the need to re-test and waste additional time.
Benefit of adaptive conductive technology:
- Reduce the battery misjudgment rate to a minimum
- Improve the bad battery detection rate
- Reduce retest times
- Ensure the power of the battery under test during the test
BT506 Advanced features explore: Start Test + Charge Test + Battery Test
1. Generator Test
Generator test refers to test different parts of the charging system, including generators, rectifiers, rectifier diodes, etc., to obtain the real charging voltage value.
All battery data about ripple, no-load voltage, load voltage are displayed to customers.
2. Starter Test
Starter test help you analyze the starter motor, including start voltage and start time, to check if the starter motor is working properly.
Load voltage refers to the voltage measured when on-board electrical appliances (such as headlamps) are turned on.
No-load voltage is the voltage measured when all on-board electrical appliances are turned off.
Start time is the time it takes for the vehicle to turn on the engine
3. Battery Test
After battery test is completed, SOH (state of health), SOC (state of charge), voltage, current, rating, and specific guidance and suggestions can be visually displayed, and the batteries can be clearly divided into: Good Battery; Good & Recharge; Charge & Retest; Bad Cell; Replace Battery.
Color-coded results summary, a list of test data, and repair tips helps you perform battery test in easy way.
Smartphone & Autel Scanner Compatibility
Different between traditional battery test, Autek MaxiBAS BT506 supports connect with Autel scanner and PC,which work together to perform complete battery test functions.
Steps to connect with mobile phone:
- Install the MaxiAP200 app (Android OS download it from Google Play, IOS download it from App Store)
- Click the MaxiAP200, register/login the Autel account.
- Scan the QR behind the BT506 to bind the BT506 to the phone
- Start battery scan
Steps to connect with Autel scanners:
- Click VCI manager APP to bind the BT506 to the scanner
- Click Battery Test App to start battery test
Upgrade to BT508, Get All BT508's Features
Just extra purchase V200P, BT506 convert to BT508 immediately, you will get more superior battery test functions as belows:
Battery Change: Guides you to replace the battery step by step.
Complete battery replacement proccess: Battery Type---Preparation---Replace battery---New Battery Test ---Battery Test.
Autel BT508 offers unique battery registration guidance and one-click registration of new batteries for 53+ car brands. After the battery is replaced, some component position Settings may be lost. In this case, the electrical reset function can reset the previous data, allowing the entire vehicle electrical system to recover normal.
All System Diagnostics: After equipped with V200P, BT508 supports all systems diagnostics for only one vehicle brand.(Optional)
Specifications of AUTEL MaxiBAS BT506
| Item |
Description |
| Connectivity |
USB 2.0, Type C |
| Bluetooth V3.0 BR/EDR+ V4.2 LE Dual-Mode |
| Input Voltage |
5 V DC |
| Working Current |
< 150 mA at 12 V DC |
| Internal Battery |
N/A |
| CCA Range |
100 to 2000 A |
| Voltage Range |
6 to 36 V |
| Working Temperature |
-10°to 50° C (14° to 122° F) |
| Storage Temperature |
-20° to 60° C (-4° to 140° F) |
| Dimension (L x W x H) |
107 mm (4.21“) x 75 mm (2.95”) x 26 mm (1.02”) (clamp cable is not included) |
| Weight |
320 g (0.7 lb) |
Package Includes:
1pc x MaxiBAS BT506
1pc x User Manual
Contact Us
Email: Sales@CarOBD.de
Skype: CarOBD.de
Facebook: https://www.facebook.com/carobd.de/Whatsapp: +86 19947637411 CarOBD.de QRcode:
Scan the QRcode,feel free to contact us on your smartphone. Shipping Warranty:
1) EU Warehouse Shipping: 3-5 working days with No Tax. We have stock in our Czech warehouse for most items. All Items titled "EU Ship" are ship from our Czech warehouse.
2) Yodel Virtual warehouse Shipping: 6-8 days with No Tax for EU customers.
3) Yanwen Express: 8-12 working days. No Tax for European Countries.The tax was pre-paid by us, when package reached, there's no tax no extra fee for customers.
(Due to high custom tax in European Countries,Like Germany, Greece,Romania,Sweden,France,etc, we will use Yanwen express as first option, if you need faster DHL shipment,please contact us ,thank you)
4) DHL Shipping: 5-7 working days. For the items have no stock in EU warehouse, we will ship it by DHL. We will declare a lower price on the invoice to help your clearance.
5) 4PX Postal Service: 7-10 working days. For the products mentioned"Standard Flat Rate Shipping Service" we will send via postal service
